RCF

Showing 1–12 of 15 results

    SoliBlanket CR-Grade

    SoliBlanket™ CR-Grade

    SoliBlanket CR-grade is one of our Special Grade RCF products and provides the highest classification and continuous use temperature of all melt/spun fibers using Chromium Oxide and  further microcrystalline processing during production. The SoliBlanket CR-grade has a classification temperature of 1480°C and is engineered to perform continuously in a wide range of applications up till 1350°C continuously.

    SoliBlanket CR-grade is one of our most durable products and is unaffected by most chemicals and can be used in the most severe operating condition. It is most of the time the working solution for applications in the production of special grades stainless steel, where normal RCF fiber is not giving the expected life time expectation.

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliBlanket CR-Grade

    Read moreQuick View
  • SoliBlanket HA-Grade

    SoliBlanket™ HA-Grade

    SoliBlanket HA-grade is exclusively developed on request of Vulcor to offer a 1370°C rated high temperature fiber blanket, without the use of zirconia. The high alumina content does not only improve the classification temperature, but also makes the fiber more stable in application with exposure to alkali. Testing at end customers in the USA has proven that the lifetime, compared to a RCF-Zr 1430 blanket in an application which was high in alkali, was nearly doubled.

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliBlanket HA-Grade

    Read moreQuick View
  • SoliBlanket HP-Grade

    SoliBlanket™ HP-Grade

    Even though we strongly believe that the SoliBlanket X-grade is the preferred choice of a 1260 RCF blanket, we also offer our SoliBlanket HP-grade. The SoliBlanket HP-grade is one of our RCF Special Grade products and produced from a high purity blend of raw materials. Similar to other products in the SoliBlanket range, the SoliBlanket HP-grade is manufactured using the same Ultra Low Shot technology and greatly benefits with better properties and handling properties. 

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliBlanket HP-Grade

    Read moreQuick View
  • SoliBlanket X-Grade

    SoliBlanket™ X-Grade

    The Standard Grade RCF range SoliBlanket consists of 2 types of Refractory Ceramic Fiber blankets for the temperature range of 1260°C to 1430°C : the X-grade and the ZR-grade. The SoliBlanket X-grade is our standard RCF blanket, has a classification temperature of 1260°C, and is recommended for use in temperatures up till 1150°C continuously.

    SoliBlanket X-grade is setting a new standard for a classic RCF blanket. Manufactured using the latest spinning technology it is delivering a better performance than a traditional refractory ceramic fiber blankets.

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliBlanket X-Grade

    Read moreQuick View
  • SoliBlanket ZR-Grade

    SoliBlanket™ ZR-Grade

    The Standard Grade RCF range SoliBlanket consists of 2 types of Refractory Ceramic Fiber blankets for the temperature range of 1260°C to 1430°C : the X-grade and the ZR-grade. The SoliBlanket ZR-grade is our standard RCF-Zr blanket which has a classification temperature of 1430°C and is recommended for use in temperatures up till 1300°C continuously. 

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliBlanket ZR-Grade

    Read moreQuick View
  • SoliBoard HS X-Grade

    SoliBoard™ HS X-Grade

    SoliBoard HS X-Grade is the High Strength version of our general purpose 1260°C rated refractory ceramic fiber (RCF) board. SoliBoard HS X-grade is manufactured from a our SoliBulk X-grade with selected inorganic and organic fillers to deliver high strength and performance in refractory linings. Compared to our standard boards the SoliBoard HS X-grade is typically 2x stronger than the standard SoliBoard X-grade. SoliBoard HS X-grade is performing in applications where standard boards do not deliver enough compressive strength, fail on modulus of rupture or are to weak for detailed machining. SoliBoard HS X-grade is extremly suitable for further CNC machining to the finest level of detail. 

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliBoard HS X-Grade

    Read moreQuick View
  • SoliBoard HS ZR-Grade

    SoliBoard™ HS ZR-Grade

    SoliBoard HS ZR-Grade is the High Strength version of our our highest temperature performing RCF board, the SoliBoard ZR-grade. SoliBoard HS ZR-grade is manufactured from a our SoliBulk ZR-grade with selected inorganic and organic fillers to deliver high strength and performance in refractory linings. Compared to our standard boards the SoliBoard HS ZR-grade is typically 2x stronger than the standard SoliBoard ZR-grade.

    SoliBoard HS ZR-grade is performing in applications where standard boards do not deliver enough compressive strength, fail on modulus of rupture or are to weak for detailed machining. SoliBoard HS ZR-grade is extremly suitable for further CNC machining to the finest level of detail. 

    View US Datasheet    View EN Datasheet    View EN MSDS

     

  • SoliBoard HS ZR-Grade

    Read moreQuick View
  • SoliBoard HT-Grade

    SoliBoard™ HT-Grade

    SoliBoard HT-Grade is developed by our team of engineers to offer you a 1400°C rated refractory ceramic fiber (RCF) board, but using standard Alumina-Silica fibers. SoliBoard HT-grade is based on our SoliBulk HA-grade and used in a unique composition which is boosting the classification temperture of our SoliBoard HT-grade to 1400°C without the use of zirconia. SoliBoard HT-grade is manufactured with selected inorganic and organic fillers to deliver high strength and performance in refractory linings and secures minimum shrinkage to temperatures close to classification temperature.

    View US Datasheet    View EN Datasheet    View EN MSDS

     

  • SoliBoard HT-Grade

    Read moreQuick View
  • SoliBoard PCW INO-Grade

    SoliBoard™ PCW INO-Grade

    SoliBoard PCW INO-grade, with a classification temperature of 1600°C, is the top end of our SoliBoard product range. We manufacture our SoliBoard PCW INO from a mixture of poly crystalline fibers and a small percentage of our own developed and heat treated SoliWool HA fiber. The result of our development is a product which is showing less than 1% shrinkage, even tested for 24 hours at 1600°C.

    As the SoliBoard PCW INO-grade is manufactured using special inorganic fillers there is hardly any fumes or loss of strength at first firing. It also means that at first firing there is nearly any loss of ‘green strength’ which is important in vacuum furnaces like in the semi conductor market. SoliBoard PCW INO-grade is very resistant to a wide range of polutions which make this an extremely durable and high performing board in a wide range of demanding refractory applications.

    View US Datasheet    View EN Datasheet

  • SoliBoard PCW INO-Grade

    Read moreQuick View
  • SoliBoard X-Grade

    SoliBoard™ X-Grade

    SoliBoard X-Grade is our general purpose 1260°C rated refractory ceramic fiber (RCF) board. SoliBoard X-grade is manufactured from a our SoliBulk X-grade with selected inorganic and organic fillers to deliver high strength and performance in refractory linings. The SoliBoard product range is manufactured using the same Ultra Low Shot technology utilized throughout our fiber product range. SoliBoard can be used for a wide range of application in refractory linings or in domestic appliances.

    View US Datasheet    View EN Datasheet    View EN MSDS

     

  • SoliBoard X-Grade

    Read moreQuick View
  • SoliBoard ZR-Grade

    SoliBoard™ ZR-Grade

    SoliBoard ZR-Grade is our highest rated Refractory Ceramic Fiber (RCF) based board with a classification temperature of 1430°C and providing solutions in applications continuously operating till 1315°C. SoliBoard ZR-grade is manufactured using SoliBulk ZR-grade with selected inorganic and organic fillers to deliver high strength and performance in refractory linings. The SoliBoard ZR-grade secures minimum shrinkage to temperatures close to classification temperature as result from the high Zirconia contents and microstructure.

    View US Datasheet    View EN Datasheet    View EN MSDS

     

  • SoliBoard ZR-Grade

    Read moreQuick View
  • SoliBulk X-Grade

    SoliBulk™ X-Grade

    The SoliBulk product range is the basis of nearly all our products as the majority of our bulk production gets converted at our own factory. In the SoliBulk product range, the SoliBulk X-grade is our standard Refractory Ceramic Fiber (RCF) 1260 bulk. We offer our SoliBulk in a wide variety of specifications tailored to the commonly known applications from raw material for Vacuum Forming to general lubricated bulk which can be used for filling and stuffing voids and gaps in furnace linings.

    To ensure that the products are meeting the requirements in the application we also provide special grades which can be deshotted, chopped, or provided at extra length.  SoliBulk X-grade has a classification temperature of 1260°C and is engineered to perform in a wide range of applications up till 1150°C.

    View US Datasheet    View EN Datasheet    View EN MSDS

     

  • SoliBulk X-Grade

    Read moreQuick View

Showing 1–12 of 15 results