High Temperature Fiber

    SoliBlanket CR-Grade

    SoliBlanket CR-grade provides the highest classification and continuous use temperature of all melt/spun fibers using Chromium Oxide and  further microcrystalline processing during production. With a classification temperature of 1480°C it is recommended for continuous use up till 1350°C. It is unaffected by most chemicals and can be used in the most severe operating condition.

  • SoliBlanket CR-Grade

    Read moreQuick View
  • SoliBlanket HA-Grade

    SoliBlanket HA-grade is exclusively developed on request of Vulcor to offer a 1370°C rated high temperature fiber blanket, without the use of zirconia. The high alumina content does not only improve the classification temperature, but also makes the fiber more stable in application with exposure to alkali. Testing at end customers in the USA has proven that the lifetime compared to a zirconia blanket in an application which was high in alkali was nearly doubled.

  • SoliBlanket HA-Grade

    Read moreQuick View
  • Placeholder

    SoliBlanket HP-Grade

    Even though we strongly believe that the SoliBlanket X-grade is the preferred choice of a 1260 RCF blanket, we also offer our SoliBlanket HP-grade. The SoliBlanket HP-grade is one of our RCF Special Grade products and produced from a high purity blend of raw materials. Similar to other products in the SoliBlanket range, the SoliBlanket HP-grade is manufactured using the same Ultra Low Shot technology and greatly benefits with better properties and handling properties. 

    SoliBlanket HP-grade is our high purity refractory ceramic fiber (RCF)1260 blanket in the SoliBlanket product range. The SoliBlanket HP-grade has a classification temperature of 1260°C and is engineered to perform in a wide range of applications up till 1150°C continuously. By a tight control ensuring alumina contents in line with datasheet, the Soliblanket HP-grade has lower shrinkage close to classification temperature.

    The Soliblanket HP-grade is stronger, feels more comfortable to handle and provides better thermal insulation. During installation our ULS technology fiber products offers a higher resiliency after compression, which is particularly important when making fiber modules or in case the blanket (strip) is installed perpendicular to the main fiber orientation, or in easier words; stack(bonded).

    SoliBlanket HP-grade is part of the SoliBlanket product range. The full SoliBlanket product range consists of five grades of Refractory Ceramic Fiber (RCF) and one grade in Low Bio Persistence (LBP) fiber blanket.

  • Placeholder

    SoliBlanket HP-Grade

    Read moreQuick View
  • SoliBlanket HR-Grade

    SoliBlanket HA-grade is exclusively developed on request of Vulcor to offer a 1370°C rated high temperature fiber blanket, without the use of zirconia. The high alumina content does not only improve the classification temperature, but also makes the fiber more stable in application with exposure to alkali. Testing at end customers in the USA has proven that the lifetime compared to a zirconia blanket in an application which was high in alkali was nearly doubled.

    In normal production operations a spun fiber with such high alumina contents would be hard to manufacture. Typically, these type of products are offered in a ‘blown’-fiber technology which create a high shot and pretty coarse blanket. Utilizing our unique Ultra Low Shot technology we have been able to offer you this new product in a much improved version to what has been supplied in the market today.

    SoliBlanket HA-grade is our one of our special grade refractory ceramic fiber blankets in the SoliBlanket product range. The high classification temperature is the result of the high alumina content of the fiber. The SoliBlanket HA-grade has a classification temperature of 1370°C and is engineered to perform in a wide range of applications up till 1200°C continuously.

    The Soliblanket HA-grade is stronger, feels more comfortable to handle and provides better thermal insulation than ‘blown’ fibers in a similar chemical composition. During installation our ULS technology fiber products offer a higher resiliency after compression, which is particularly important when making fiber modules or in case the blanket (strip) is installed perpendicular to the main fiber orientation, or in easier words; stack(bonded).

    SoliBlanket HA-grade is part of the special grade Refractory Ceramic Fiber product range. The full SoliBlanket product range consists of five grades of Refractory Ceramic Fiber (RCF) and one grade in Low Bio Persistence (LBP) fiber blanket.

  • SoliBlanket HR-Grade

    Read moreQuick View
  • SoliBlanket ULS-Grade

    Vulcor is proud to present you the pinnacle of our 3 fiber blanket ranges were the Generation III spinning technology is delivering the full potential of the product; the SoliBlanket ULS-grade. The SoliBlanket ULS-grade is the first Generation III manufactured, Ultra Low Shot, low bio persistence (LBP) high temperature insulating fiber blanket worldwide. This Generation III, Ultra Low Shot technology is the result of extensive research, implementation of our knowhow and the latest manufacturing technology. Ultra Low Shot technology is at the cutting edge of fiber production, achieving the highest possible thermal insulation value and handling strength.

  • SoliBlanket ULS-Grade

    Read moreQuick View
  • SoliBlanket X-Grade

    Vulcor is proud to present you one of our 3 fiber blankets ranges were the Generation III spinning technology is delivering the full potential of the product; the SoliBlanket X-grade. With our Generation III spinning technology, coarse shot is part of history. We call this technology our Ultra Low Shot technology (ULS).

    Compared to conventional Refractory Ceramic Fiber blankets, the SoliBlanket X-grade is differentiating with the highest possible thermal insulationvalue, improved mechanical strength and better handling properties. This is not just a random claim; this is what you see and feel when working with the product.

    Of our SoliBlanket Standard RCF productrange the SoliBlanket X-grade is our main refractory ceramic fiber (RCF)1260 blanket. The SoliBlanket X-grade has a classification temperature of 1260°C and is engineered to perform in a wide range of applications up till 1150°C.

    Our ULS technology is resulting in less shot and a higher fiberindex and leads to a true Generation III insulation blanket. The Soliblanket X-grade is stronger, feels more comfortable to handle and provides better thermal insulation. During installation our ULS technology fiber products offers a higher resiliency after compression, which is particularly important when making fiber modules or in case the blanket (strip) is installed perpendicular to the main fiber orientation, or in easier words; stack(bonded).

    The SoliBlanket X-grade is part of the SoliBlanket product range. The full SoliBlanket product range consists of five grades of Refractory Ceramic Fiber (RCF) and one grade in Low Bio Persistence (LBP) fiber blanket.

  • SoliBlanket X-Grade

    Read moreQuick View
  • SoliBlanket ZR-Grade

    Vulcor is proud to present you the second of our 3 fiber blankets ranges were the Generation III spinning technology is delivering the full potential of the product; the SoliBlanket ZR-grade. With our Generation III spinning technology, coarse shot is part of history. We call this technology our Ultra Low Shot technology (ULS).

    Compared to conventional Refractory Ceramic Fiber (RCF-Zr) blankets, the SoliBlanket ZR-grade is differentiating with the highest possible thermal insulationvalue, improved mechanical strength and better handling properties. This is not just a random claim; this is what you see and feel when working with the product.

    Of our SoliBlanket Standard RCF productrange the SoliBlanket ZR-grade is our main refractory ceramic fiber (RCF-Zr) 1430 blanket. We ensure the high classification temperature by the chemical composition, which means we have a tight control on the zirconia contents of our blankets.The SoliBlanket ZR-grade has a classification temperature of 1430°C and is engineered to perform in a wide range of applications up till 1300°C continuously.

    The Soliblanket ZR-grade is stronger, feels more comfortable to handle and provides better thermal insulation. During installation the benefit of our advanced spinning process offers a higher resiliency after compression. This is particularly important when making fiber modules or in case the blanket (strip) is installed perpendicular to the main fiber orientation, or in easier words; stack(bonded).

    SoliBlanket ZR-grade is part of the SoliBlanket product range. The full SoliBlanket product range consists of five grades of Refractory Ceramic Fiber (RCF) and one grade in Low Bio Persistence (LBP) fiber blanket.

  • SoliBlanket ZR-Grade

    Read moreQuick View
  • SoliBoard HT-Grade

    SoliBoard HT-Grade has been developed by our team of engineers to offer you a 1400°C rated refractory ceramic fiber (RCF) board, using our standard 1260°C fibers. SoliBoard HT-grade is based on our SoliBulk HP-grade and used in a unique composition which is boosting the classification temperture of our SoliBoard HT-grade to 1400°C without the use of zirconia.

    The SoliBoard product range is manufactured using the same Ultra Low Shot technology utilized throughout our fiber product range. SoliBoard can be used for a wide range of application in refractory linings or in domestic appliances.

    We manufacture the SoliBoard product range on our continuous board line, with state of the art drying techniques. This drying process is much more sustainable, leading to 50 % energy saving compared to conventional drying techniques and allows us to dry the product to the core to a thickness of 100 mm. As it is manufactured on our continuous board line, which spans over 200 m (600 ft), our product are much more controlled and consistent compared to batch manufactured vacuum forming process boards. As a result we can offer you a uniform, lightweight, low shot and stable board at high consistency, quality and performance.

    The SoliBoard HT-grade is rated at 1400°C and engineered to perform in a wide range of applications up till 1250°C continuously. The SoliBoard standard product range consists of 3 types of standard refractory ceramic fiber (RCF) boards, an extensive range of low bio persistence (LBP) boards. We also deliver a Special Grade Boards range for High Strength or, when based on PCW fiber, boards for the most demanding applications.

  • SoliBoard HT-Grade

    Read moreQuick View
  • Placeholder

    SoliBoard NXT-Grade

    Vulcor is proud to introduce our SoliBoard NXT-grade, our first 1300°C rated low bio persistence (LBP) fiber based board. SoliBoard NXT-grade is manufactured from a our low bio persistence bulk fiber with selected inorganic and organic fillers to deliver high strength and performance in refractory linings. SoliBoard can be used for a wide range of application in refractory linings or condensing boilers.

    We manufacture the SoliBoard product range on our continuous board line, with state of the art drying techniques. This drying process is much more sustainable, leading to 50 % energy saving compared to conventional drying techniques and allows us to dry the product to the core to a thickness of 100 mm. As it is manufactured on our continuous board line, which spans over 200 m (600 ft), our product are much more controlled and consistent compared to batch manufactured vacuum forming process boards. As a result we can offer you a uniform, lightweight, low shot and stable board at high consistency, quality and performance.

    All products in the SoliWool ULS fibers product range, like the SoliBoard NXT, meet the requirements specified under NOTE Q of European Regulation 1272/2008. All SoliBoard NXT products are therefore exonerated from labelling requirements in Europe.

    The SoliBoard NXT-grade is our boosted, low bio persistence, 1300°C rated general purpose board and engineered to perform in a wide range of applications up to 1150°C continuously. The SoliBoard standard product range consists of 3 types of standard refractory ceramic fiber (RCF) boards, and an extensive range of low bio persistence (LBP) boards. We also deliver a Special Grade Boards range for High Strength or, when based on PCW fiber, boards for the most demanding applications.

  • Placeholder

    SoliBoard NXT-Grade

    Read moreQuick View
  • SoliBoard PCW INO-Grade

    The SoliBoard PCW INO-grade, with a classification temperature of 1600°C, is the top end of our SoliBoard product range. We manufacture our SoliBoard PCW INO from a mixture of poly crystalline fibers and a small percentage of our own developed and heat treated SoliWool HA fiber. The result of our developement is a product which is showing less than 1% shrinkage even if tested at 1600°C . As the SoliBoard PCW INO-grade is manufactured using special inorganic fillers there is hardly any fumes or loss of strength at first firing.

    SoliBoard PCW INO-grade is part of our SoliBoard Special Grade product range. The SoliBoard Special Grade product range consists of board which are all designed for a special purpose. Either these boards have been developed for high strengh or extreme durability and the most demanding applications.

    We manufacture the SoliBoard product range on our continuous board line, with state of the art drying techniques. This drying process is much more sustainable, leading to 50 % energy saving compared to conventional drying techniques and allows us to dry the product to the core to a thickness of 100 mm. As it is manufactured on our continuous board line, which spans over 200 m (600 ft), our product are much more controlled and consistent compared to batch manufactured vacuum forming process boards. As a result we can offer you a uniform, lightweight, low shot and stable board at high consistency, quality and performance.

    The SoliBoard PCW INO-grade has a classfication temperature of 1600°C and engineered to perform in a wide range of applications up till 1500°C continuously. The SoliBoard standard product range consists of 3 types of standard refractory ceramic fiber (RCF) boards, an extensive range of low bio persistence (LBP) boards. We also deliver a Special Grade Boards range for High Strength or, and this PCW fiber based board for the most demanding applications.

  • SoliBoard PCW INO-Grade

    Read moreQuick View
  • SoliBoard ULS-Grade

    Vulcor is proud to introduce our SoliBoard ULS-grade, our 1200°C rated low bio persistence (LBP) fiber based board. SoliBoard ULS-grade is manufactured from a our SoliBulk ULS-grade bulk fiber with selected inorganic and organic fillers to deliver high strength and performance in refractory linings. SoliBoard can be used for a wide range of application in refractory linings or condensing boilers.

    We manufacture the SoliBoard product range on our continuous board line, with state of the art drying techniques. This drying process is much more sustainable, leading to 50 % energy saving compared to conventional drying techniques and allows us to dry the product to the core to a thickness of 100 mm. As it is manufactured on our continuous board line, which spans over 200 m (600 ft), our product are much more controlled and consistent compared to batch manufactured vacuum forming process boards. As a result we can offer you a uniform, lightweight, low shot and stable board at high consistency, quality and performance.

    All products in the SoliWool ULS fibers product range, like the SoliBoard ULS, meet the requirements specified under NOTE Q of European Regulation 1272/2008. All SoliBoard ULS products are therefore exonerated from labelling requirements in Europe.

    The SoliBoard ULS-grade is our standard 1200°C rated general purpose board and engineered to perform in a wide range of applications up till 1050°C continuously. The SoliBoard standard product range consists of 3 types of standard refractory ceramic fiber (RCF) boards, and an extensive range of low bio persistence (LBP) boards. We also deliver a Special Grade Boards range for High Strength or, when based on PCW fiber, boards for the most demanding applications.

  • SoliBoard ULS-Grade

    Read moreQuick View
  • SoliBoard X-Grade

    SoliBoard X-Grade is our general purpose 1260°C rated refractory ceramic fiber (RCF) board. SoliBoard X-grade is manufactured from a our SoliBulk X-grade with selected inorganic and organic fillers to deliver high strength and performance in refractory linings. The SoliBoard product range is manufactured using the same Ultra Low Shot technology utilized throughout our fiber product range. SoliBoard can be used for a wide range of application in refractory linings or in domestic appliances.

    We manufacture the SoliBoard product range on our continuous board line, with state of the art drying techniques. This drying process is much more sustainable, leading to 50 % energy saving compared to conventional drying techniques and allows us to dry the product to the core to a thickness of 100 mm. As it is manufactured on our continuous board line, which spans over 200 m (600 ft), our product are much more controlled and consistent compared to batch manufactured vacuum forming process boards. As a result we can offer you a uniform, lightweight, low shot and stable board at high consistency, quality and performance.

    The SoliBoard X-grade is our standard 1260°C rated general purpose board and engineered to perform in a wide range of applications up till 1150°C continuously. The SoliBoard standard product range consists of 3 types of standard refractory ceramic fiber (RCF) boards, an extensive range of low bio persistence (LBP) boards. We also deliver a Special Grade Boards range for High Strength or, when based on PCW fiber, boards for the most demanding applications.

  • SoliBoard X-Grade

    Read moreQuick View