-

Products

Showing 13–24 of 24 results

    SoliBoard ULS-Grade

    SoliBoard™ ULS®-Grade

    The low bio persistence grade of the SoliBlanket product range is labelled our ‘ULS’ grade. The SoliBlanket ULS-grade is the first Generation III manufactured, Ultra Low Shot, low bio persistence (LBP) high temperature insulating fiber blanket worldwide. The SoliBlanket ULS-grade has a classification temperature of 1200°C and is engineered to perform continuously in a wide range of applications up till 1050°C continuously. As a result, SoliBoard ULS-grade is a ideal choice for refractory installations, but is particularly  populair for use in domestic boilers.

    All products in the SoliWool ULS fibers product range, like the SoliBoard ULS, meet the requirements specified under NOTE Q of European Regulation 1272/2008. All SoliBoard ULS products are therefore exonerated from labelling requirements in Europe.

     

  • SoliBoard ULS-Grade

    Read moreQuick View
  • SoliBoard X-Grade

    SoliBoard™ X-Grade

    SoliBoard X-Grade is our general purpose 1260°C rated refractory ceramic fiber (RCF) board. SoliBoard X-grade is manufactured from a our SoliBulk X-grade with selected inorganic and organic fillers to deliver high strength and performance in refractory linings. The SoliBoard product range is manufactured using the same Ultra Low Shot technology utilized throughout our fiber product range. SoliBoard can be used for a wide range of application in refractory linings or in domestic appliances.

    View US Datasheet    View EN Datasheet    View EN MSDS

     

  • SoliBoard X-Grade

    Read moreQuick View
  • SoliBoard ZR-Grade

    SoliBoard™ ZR-Grade

    SoliBoard ZR-Grade is our highest rated Refractory Ceramic Fiber (RCF) based board with a classification temperature of 1430°C and providing solutions in applications continuously operating till 1315°C. SoliBoard ZR-grade is manufactured using SoliBulk ZR-grade with selected inorganic and organic fillers to deliver high strength and performance in refractory linings. The SoliBoard ZR-grade secures minimum shrinkage to temperatures close to classification temperature as result from the high Zirconia contents and microstructure.

    View US Datasheet    View EN Datasheet    View EN MSDS

     

  • SoliBoard ZR-Grade

    Read moreQuick View
  • SoliBulk ULS-Grade

    SoliBulk™ ULS®-Grade

    The SoliBulk product range is the basis of nearly all our products as the majority of our bulk production gets converted at our own factory. In the SoliBulk product range, the SoliBulk ULS-grade is our famous Generation III, Ultra Low Shot technology low bio persistence bulk. We offer our SoliBulk in a wide variety of specifications tailored to the commonly known applications from raw material for Vacuum Forming to general lubricated bulk which can be used for filling and stuffing voids and gaps in furnace linings.

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliBulk ULS-Grade

    Read moreQuick View
  • SoliBulk X-Grade

    SoliBulk™ X-Grade

    The SoliBulk product range is the basis of nearly all our products as the majority of our bulk production gets converted at our own factory. In the SoliBulk product range, the SoliBulk X-grade is our standard Refractory Ceramic Fiber (RCF) 1260 bulk. We offer our SoliBulk in a wide variety of specifications tailored to the commonly known applications from raw material for Vacuum Forming to general lubricated bulk which can be used for filling and stuffing voids and gaps in furnace linings.

    To ensure that the products are meeting the requirements in the application we also provide special grades which can be deshotted, chopped, or provided at extra length.  SoliBulk X-grade has a classification temperature of 1260°C and is engineered to perform in a wide range of applications up till 1150°C.

    View US Datasheet    View EN Datasheet    View EN MSDS

     

  • SoliBulk X-Grade

    Read moreQuick View
  • SoliBulk ZR-Grade

    SoliBulk™ ZR-Grade

    The SoliBulk product range is the basis of nearly all our products as the majority of our bulk production gets converted at our own factory. In the SoliBulk product range, the SoliBulk ZR-grade is our highest classified refractory ceramic fiber (RCF-Zr)1430 bulk fiber. We offer our SoliBulk in a wide variety of specifications tailored to the commonly known applications from raw material for Vacuum Forming to general lubricated bulk which can be used for filling and stuffing voids and gaps in furnace linings.

    To ensure that the products are meeting the requirements in the application we also provide special grades which can be deshotted, chopped, or provided at extra length.  SoliBulk ZR-grade has a classification temperature of 1430°C and is engineered to perform in a wide range of applications up till 1300°C.

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliBulk ZR-Grade

    Read moreQuick View
  • SoliPaper HS-grade

    SoliPaper™ ULS®-Grade High Strength

    The SoliPaper HS-grade is our high strength version of our standard SoliPaper ULS®. SoliPaper HS-grade contains a small percentage of special high strength fibers which are increasing the tensile strength of the final paper product. In result the SoliPaper HS-grade offers up to 8 times higher tensile strength than a standard low bio persistence fiber paper. Whilst the SoliPaper HS is based on our 1200°C rated SoliWool ULS bulk fiber, and is able to offer protection to short term exposures till 1300°C, it is recommended for continuous use temperature till 900°C. 

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliPaper HS-grade

    Read moreQuick View
  • SoliPaper PCW-Grade

    SoliPaper™ PCW-Grade

    SoliPaper PCW-grade, with a classification temperature of 1600°C, is the top end of our SoliPaper product range. SoliPaper PCW-grade is manufactured from a mixture of high alumina/ mullite fibers, special grade RCF fiber and special organic binders. We have developed an optimized production process to manufacture uniform, lightweight, low shot and flexible paper-like products. Where the PCW fiber component is providing low shrinkage at classification temperature the special grade RCF fibers adds handling strength to the otherwise typical fragile paper product. 

  • SoliPaper PCW-Grade

    Read moreQuick View
  • SoliPaper ULS-Grade

    SoliPaper™ ULS®-Grade

    SoliPaper ULS-grade is our standard Low Bio Persistence (LBP) fiber paper which is available for use in a wide range of applications. SoliPaper ULS-grade is the original from which several spin-off products like the SoliPaper ULS LOWPAC and the ULS High Strength have been developed. SoliPaper ULS-grade is manufactured from our Generation III, Ultra Low Shot fiber technology fiber.

     

    In result the SoliPaper ULS-grade, compared to standard LBP fiber based papers, excels in the highest possible thermal insulation value and handling strength. SoliPaper ULS-grade has a classification temperature of 1200°C and is recommended for use up till 1050°C continuously.

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliPaper ULS-Grade

    Read moreQuick View
  • SoliPaper ULS-Grade LowPac

    SoliPaper™ ULS®-Grade LowPac

    SoliPaper ULS®  LOWPAC is our industrial grade low bio persistence fiber paper made from our SoliWool ULS bulk fiber and special selected fillers. Compared to our standard SoliPaper ULS,  the LOWPAC grade is manufactured with a lower density and tighter thickness specification. SoliPaper ULS LOWPAC is only available in Jumborolls which are optimized for conversion by high volume gasket cutting. SoliPaper ULS-grade LOWPAC has a classification temperature of 1200°C and is recommended for use up till 1050°C.

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliPaper ULS-Grade LowPac

    Read moreQuick View
  • SoliPaper X-Grade

    SoliPaper™ X-Grade

    SoliPaper X-grade is our standard Refractory Ceramic Fiber (RCF) 1260 paper which is available for use in a wide range of applications. The SoliBulk X-grade, which is the main component of manufacturing process of the SoliPaper X-grade, is one of the products taking most benefit of the Generation III, Ultra Low Shot fiber technology. In result the SoliPaper X-grade, compared to standard RCF papers, excels in the highest possible thermal insulation value and handling strength. SoliPaper X-grade is manufactured from our standard 1260°C rated RCF SoliWool bulk and special selected fillers. With a classification temperature of 1260°C it is recommended for use up till 1100°C.

    View US Datasheet    View EN Datasheet    View EN MSDS

  • SoliPaper X-Grade

    Read moreQuick View
  • SoliPaper ZR-Grade

    SoliPaper™ ZR-Grade

    Vulcor is proud to present the SoliPaper ZR-grade which are manufactured from our high purity Refractory Ceramic Fiber (RCF-Zr) 1430 SoliBulk ZR-grade and special selected fillers. We have developed an optimized production process to manufacture uniform, lightweight, low shot and flexible paper-like products. SoliPaper ZR is based on the Ultra Low Shot technology which is at the cutting edge of fiber production, achieving the highest possible thermal insulation value and handling strength

    Based on SoliWool ZR Bulk, the SoliPaper ZR-grade is providing a proven solution in applications operating continuously till temperatures of 1300°C.

    View US Datasheet    View EN Datasheet    View EN MSDS

     

  • SoliPaper ZR-Grade

    Read moreQuick View

Showing 13–24 of 24 results