Description
SoliFelt is typically used in applications were a flexible gasket made from SoliPaper can not be used and when thicker material is required. SoliFelt is strong, sturdy, but also flexible and resilient after thickness compression.
All products in the SoliFelt product range are manufactured from true Generation III, ultra clean and fine SoliWool fiber and organic binders. As a result the SoliFelt has a very smooth surface, close dimension tolerances, exceptionally low dust, high handling strength, better thermal insulating performance and offer greater resiliency after compression as a result of the superior fiber index.
All products in the SoliWool ULS fiber product range, like the SoliFelt ULS, meet the requirements specified under NOTE Q of European Regulation 1272/2008. All SoliFelt ULS products are therefore exonerated from labelling requirements in Europe.
Next to the SoliFelt ULS we also offer the SoliFelt in various Refractory Ceramic Fiber (RCF) grades.
Benefits
- High fiber index
- Low shot technology
- Excellent insulation performance
- High handling strength
- Close dimensional tolerance
- Smooth surface and low dust
- Easy die-cutting for high temperature gaskets
- Excellent thermal stability
- Exonerated from carcinogenic classification
Typical applications
- Gasket for expansion joints between pre-casted shapes and IFB linings
- Gasket for ladles and ingots in steel industry
- Veneering modules production
- General technical insulation of furnaces and technical installations
Type
Flexible Felt from Refractory Ceramic Fiber (RCF) and organic binders.
Temperature range
SoliFelt™ ULS-grade has a classification temperature of 1260°C and can be used up till 1200°C continuously.
The maximum continuous use temperature provided on the website is a guideline and only applicable in a clean oxidizing atmosphere.
Product range
SoliFelt™ ULS-grade is part of an extensive product range supplied by Vulcor Insulation. Vulcor Insulation is supplying insulation solutions from cryogenic to high temperature applications. All products offered by Vulcor are manufactured in house or sourced from exclusive trusted third party partners.
Technical support
Vulcor Insulation provides specifiers and customers with guidance on all aspects of the materials selection for their application, the installation and compliance with relevant regulations and performance standards.
For additional information about product performance, or to identify the recommended product for your application, please contact the team at Vulcor Insulation.
Availability
SoliFelt is standard supplied in sheets of 1200 x 600 mm and packed in carton boxes of approximately 120 mm high. The boxes are stacked to a total height of approximately 79 inch. Please refer to the list below for available sizes and packaging.
| Thickness | Per carton box | Boards per pallet |
|---|---|---|
| 6 | 20 | 280 |
| 13 | 10 | 140 |
| 25 | 5 | 70 |
Properties
| Properties measured | Standard | Unit | SoliFelt™ ULS-grade |
|---|---|---|---|
| Grade | LBP | ||
| Colour | off-white | ||
| Classification temperature | °C | 1200 | |
| Continuous use temperature | °C | 1100 | |
| Density | kg/m3 | 160 | |
| Loss on ignition | wgt% | < 8 | |
| Permanent linear shrinkage | EN1094-7 | % | |
| @1100°C | < 1,5 | ||
| Thermal conductivity | ASTM C201 | W/mK | |
| @ 200°C | 0,06 | ||
| @ 400°C | 0,09 | ||
| @ 600°C | 0,14 | ||
| @ 800°C | 0,20 | ||
| @ 1000°C | 0,27 | ||
| Chemical composition | ISO12677 | % | |
| SiO2 | 63-66 | ||
| CaO | 26-33 | ||
| MgO | 3-7 | ||
| Other | < 0,8 |
Properties
| Properties measured | Standard | Unit | SoliFelt™ X-grade |
|---|---|---|---|
| Grade | RCF | ||
| Colour | off-white | ||
| Classification temperature | °F | 2200 | |
| Continuous use temperature | °F | 2000 | |
| Density | PCF | 10 | |
| Loss on ignition | wgt% | < 8 | |
| Permanent linear shrinkage | EN1094-7 | % | |
| @2200°F | < 1,5 | ||
| Thermal conductivity | ASTM C201 | BTU·in/hr·ft2·°F | |
| @500°F | 0.45 | ||
| @1000°F | 0.78 | ||
| @1500°F | 1.43 | ||
| @1800°F | 2.03 | ||
| @2000°F | 2.12 | ||
| Chemical composition, | ISO12677 | % | |
| SiO2 | 63-66 | ||
| CaO | 26-33 | ||
| MgO | 3-7 | ||
| Other | < 0.8 |
